chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Fuel Pressure Release|Service and Repair|Page 3046 > < Fuel - GM's Position on Use of E 15 in 2007 Newer M.Y.|Page 3041
Page 1
background image

Fuel Pressure Release: Service and Repair

Fuel Pressure Relief

Special Tools

EN-34730-91 - Pressure Tester

For equivalent regional tools, refer to Special Tools   (See: Computers and Control Systems/Tools and Equipment).

Warning

Gasoline or gasoline vapors are highly flammable. A fire could occur if an ignition source is present. Never drain or store gasoline or diesel fuel in an
open container, due to the possibility of fire or explosion. Have a dry chemical (Class B) fire extinguisher nearby.

Warning

Relieve the fuel system pressure before servicing fuel system components in order to reduce the risk of fire and personal injury.

After relieving the system pressure, a small amount of fuel may be released when servicing the fuel lines or connections. In order to reduce the chance of
personal injury, cover the regulator and the fuel line fittings with a shop towel before disconnecting. This will catch any fuel that may leak out. Place the
towel in an approved container when the disconnection is complete.

1. Remove the fuel injector rail cap (1).

Fuel Pressure Release|Service and Repair|Page 3046 > < Fuel - GM's Position on Use of E 15 in 2007 Newer M.Y.|Page 3041