Cruze L4-1.4L Turbo (2011)
Fuel Pressure Sensor/Switch: Service and Repair
Fuel Pressure Sensor Replacement
Removal Procedure
Warning: Refer to Gasoline/Gasoline Vapors Warning (See: Fuel/Service Precautions).
Warning: Refer to Safety Goggles and Fuel Warning (See: Service Precautions/Safety Goggles and Fuel Warning).
1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
3. Remove the fuel pressure sensor wiring harness plug (2) from the fuel pressure sensor (1).
4. Remove the fuel pressure sensor (1) from the fuel pressure relief valve (2).
5. Remove the fuel pressure sensor seal ring (3).