Cruze L4-1.4L Turbo (2011)
Fuel Tank Unit: Service and Repair
Fuel Sender Assembly Replacement
Removal Procedure
Warning: Refer to Gasoline/Gasoline Vapors Warning (See: Fuel/Service Precautions).
Warning: Refer to Safety Goggles and Fuel Warning (See: Service Precautions/Safety Goggles and Fuel Warning).
Caution: Use care while handling the fuel sender to prevent damage and incorrect fuel level readings.
1. Remove the fuel tank fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement (See: Fuel Pump/Service and Repair/Fuel Tank
Fuel Pump Module Replacement).
2. Disconnect the fuel sender assembly wiring harness plugs (1).
3. Unclip the 2 fuel sender retainer pins.
4. Remove the fuel sender assembly (2).
Installation Procedure