Cruze L4-1.4L Turbo (2011)
Fuel Level Sensor: Service and Repair
Fuel Sender Assembly Replacement
Removal Procedure
Warning: Refer to Gasoline/Gasoline Vapors Warning (See: Fuel Delivery and Air Induction/Fuel/Service Precautions).
Warning: Refer to Safety Goggles and Fuel Warning (See: Fuel Delivery and Air Induction/Service Precautions/Safety Goggles and Fuel Warning).
Caution: Use care while handling the fuel sender to prevent damage and incorrect fuel level readings.
1. Remove the fuel tank fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement (See: Fuel Delivery and Air Induction/Fuel
Pump/Service and Repair/Fuel Tank Fuel Pump Module Replacement).
2. Disconnect the fuel sender assembly wiring harness plugs (1).
3. Unclip the 2 fuel sender retainer pins.
4. Remove the fuel sender assembly (2).
Installation Procedure
