Cruze L4-1.4L Turbo (2011)
1. Rotate the cylinder (8) so that the side with the tumbler spring wells faces up.
2. Insert the tumbler springs (4) into the 4 spring wells.
3. Install the tumbler (10) for key cut position 3 in the slot closest to the cylinder head. Install the remaining tumblers, key cut positions 5, 7 and 9,
following the key code and same process. Press the tumblers in place until they are secure.
4. Check the correct loading of the tumblers by inserting the key into the cylinder. All tumblers should be flushed with the lock cylinder body.
5. Turn the cylinder so the side with the other tumbler spring wells faces up.
6. Insert the tumbler springs (4) into the 4 spring wells.
7. The first tumbler closest to the head of the lock cylinder to be loaded will be the fourth key cut position. Install the remaining tumblers for key cut
positions 6, 8 and 10. Press the tumblers in place until they are secure.
8. Check the correct loading of the tumblers by inserting the key into the cylinder. All of the tumblers should be flushed with the lock cylinder body.
9. Apply lubricant to the cylinder body and tumbler surfaces along with a small amount in the head of the cylinder using the supplied lubricant.
10. Install the retainer (5) into the spring wells in the head of the lock cylinder.
11. Snap the shutter (7) into the cylinder.
12. Assemble the cylinder into the case (3).
13. Align dimples of the cylinder cap (6) with the 4 recesses in the cap. Secure by pressing the cap into place with light hand pressure.
14. Assemble the rod clip (2) to the lever (1).
15. Assemble the lever (1) to the lock. Use driver unit (11) to retain the lever assembly.
16. Assemble the gasket to the lock.
17. Insert the key into the lock and function the lock to check for proper assembly and smooth operation.
