Cruze L4-1.4L Turbo (2011)
6. Remove the oil level plug.
7. Discard the oil level plug.
8. Allow the fluid to drain completely from the plug hole.
Caution
To preserve fluid quality and avoid harsh transmission shifts, after allowing the fluid to drain completely from the plug hole, remove 0.4L of
transmission fluid.
9. Using a syringe and a 7.1mm (9/32 in) rubber hose, remove 0.4L of transmission fluid.
10. Clean all dirt and debris from the transmission oil level plug area.
11. Install a new oil level plug.
Tighten
Tighten the plug to 17 Nm (12.5 lb ft).
12. Remove the shop towel or plastic from the frame/front suspension.
13. Remove the transmission fluid from the vehicle frame, transmission, suspension and engine.