Cruze L4-1.4L Turbo (2011)
1. Install the 3 input speed sensor seals (1).
2. Install the input speed sensor (3).
3. Verify that the retaining tabs are locked completely.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the input speed sensor bolt (2) M6 x 23 and tighten to 9 Nm (80 lb in).
5. Install the control valve body. Refer to Control Valve Body Replacement (See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Valve Body/Service and Repair/Control Valve Body Replacement).
6. Perform the transmission adaptive values learn procedure. Refer to Transmission Adaptive Values Learn (See: Transmission and
Drivetrain/Automatic Transmission/Transaxle/Testing and Inspection/Programming and Relearning).