Cruze L4-1.4L Turbo (2011)
5. Clear all BCM diagnostic trouble codes (DTCs).
6. Navigate to the Vehicle Control Systems menu.
7. Select Module Setup menu item.
8. Select BCM menu item.
9. Select the BPP Sensor Calibration procedure and follow the directions displayed on the screen
6. Perform ECM BAS Home Learn Procedure.
1. Put the ignition key in the RUN position (no crank).
2. Apply and slowly release the brake pedal two times and then wait 2 seconds.
3. Repeat Step 6.2 eight times.
Warranty Transaction Information
Submit a claim using the table above.
Disclaimer