Cruze L4-1.4L Turbo (2011)
8. Using the lift table, raise the axle to the proper trim height specification by measuring the vertical distance (a) between the center of the wheel hub
(2) and top of the wheel opening (1).
Dimension (a): 385 mm (15.16 in)
Warning: Refer to Torque-to-Yield Fastener Warning (See: Engine, Cooling and Exhaust/Engine/Timing Components/Service
Precautions/Torque-to-Yield Fastener Warning).
9. Tighten the NEW axle bushing through bolts (1) and nuts and tighten to 70 Nm (52 lb ft) + 120° , using the EN-45059 - angle meter.
10. Install the rear coil springs. Refer to Rear Spring Replacement (See: Suspension Spring ( Coil / Leaf )/Service and Repair/Rear Suspension/Rear
Spring Replacement).
11. Install the lower shock absorber bolts. Refer to Shock Absorber Replacement (See: Suspension Strut / Shock Absorber/Service and Repair/Rear
Suspension/Shock Absorber Replacement).
