Cruze L4-1.4L Turbo (2011)
8. Install NEW flange gasket.
9. Install rear exhaust pipe (1) to flange.
Caution: Refer to Torque-to-Yield Fastener Caution (See: Engine, Cooling and Exhaust/Engine/Timing Components/Service
Precautions/Torque-to-Yield Fastener Caution)
10. Install NEW exhaust front pipe to exhaust rear muffler nuts (2, 3) and tighten to 17 Nm (13 lb ft).
11. Lower the vehicle.
Equalizer Beam Link Replacement - Right Side
Equalizer Beam Link Replacement - Right Side
Special Tools
EN-45059 - Angle Sensor Kit
For equivalent regional tools. Refer to Special Tools (See: Tools and Equipment/Rear Suspension).
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
