Cruze L4-1.4L Turbo (2011)
Warning: Refer to Torque-to-Yield Fastener Warning (See: Engine, Cooling and Exhaust/Engine/Timing Components/Service
Precautions/Torque-to-Yield Fastener Warning).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the NEW equalizer beam link bolt and nut (1) to equalizer beam center link (2) and tighten to 40 Nm (30 lb ft) + 60° , using the EN-45059
- angle meter.
4. Install and hand tighten the equalizer beam link bolt (1) to the rear axle (2) and tighten to 160 Nm (118 lb ft).
5. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
6. Lower the vehicle to ground.
