Cruze L4-1.4L Turbo (2011)
*
The steering gear-Refer to Steering Gear Replacement .
Installation Procedure
1. Install the following components on the drivetrain and front suspension frame if removed:
*
The radiator support brackets.
*
The stabilizer shaft-Refer to Stabilizer Shaft Replacement .
*
The lower control arms-Refer to Lower Control Arm Replacement .
*
The steering gear-Refer to Steering Gear Replacement .
2. Install the frame (4) into the vehicle.
3. Install the frame reinforcements (3).
Caution: Refer to Fastener Caution .
4. Install the frame rear bolts (2) and tighten to 160 Nm (118 lb ft).
5. Install the frame front bolts (1) and tighten to 160 Nm (118 lb ft).
6. Remove the support for the power steering gear.
