Cruze L4-1.4L Turbo (2011)
18. Install the lower steering intermediate shaft (1) bolt and tighten to 34 Nm (25 lb ft).
19. Remove the support of the radiator and condenser.
20. Lower the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle .
21. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
22. Install the exhaust front pipe. Refer to Exhaust Front Pipe Replacement .
23. Install the engine shield, if equipped. Refer to Engine Shield Replacement (See: Body and Frame/Frame/Skid Plate/Service and Repair).
24. Install the engine splash shields. Refer to Front Compartment Splash Shield Replacement (See: Body and Frame/Splash Guard/Service and
Repair/Front Compartment Splash Shield Replacement).
25. Install the front compartment insulator, if equipped. Refer to Front Compartment Insulator Replacement (See: Body and Frame/Splash
Guard/Service and Repair/Front Compartment Insulator Replacement).