Cruze L4-1.4L Turbo (2011)
Hold the transmission range selector lever while removing or installing the lever retaining nut. Excessive torque on the manual shaft can damage the
detent lever hub retainer which could allow the vehicle to roll when placed in the park position.
5. Remove the transmission range selector lever nut (1).
6. Remove the transmission range selector lever (2).
Installation Procedure
Warning
Hold the transmission range selector lever while removing or installing the lever retaining nut. Excessive torque on the manual shaft can damage the
detent lever hub retainer which could allow the vehicle to roll when placed in the park position.
1. Install the transmission range selector lever (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the transmission range selector lever nut (1) and tighten to 30 Nm (22 lb ft).
