Cruze L4-1.4L Turbo (2011)
6. Connect the electrical connector (1) transmission control module (TCM), then clip in the wiring harness to transmission.
7. Install the wiring harness starter motor to transmission. Install bolt to retainer on valve body cover. Clip in wiring harness to retainer on valve body
cover and range selector cable bracket.
8. Raise the vehicle.
9. Install the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement (See: Body and Frame/Splash Guard/Service
and Repair/Front Compartment Splash Shield Replacement)
10. Lower the vehicle.
11. Install the transmission fluid cooler outlet pipe. Use NEW sealing washer. Refer to Transmission Fluid Cooler Outlet Pipe Replacement (LDE,
LUW) (See: Fluid Line/Hose/Service and Repair/Transmission Fluid Cooler Outlet Pipe Replacement)Transmission Fluid Cooler Outlet Pipe
Replacement (LLU, LUJ) (See: Fluid Line/Hose/Service and Repair/Transmission Fluid Cooler Outlet Pipe Replacement).
12. Install the transmission fluid cooler inlet pipe to the transmission. Use NEW sealing washer. Refer to Transmission Fluid Cooler Inlet Pipe
Replacement (LDE, LUW) (See: Fluid Line/Hose/Service and Repair/Transmission Fluid Cooler Inlet Pipe Replacement)Transmission Fluid
Cooler Inlet Pipe Replacement (LLU, LUJ) (See: Fluid Line/Hose/Service and Repair/Transmission Fluid Cooler Inlet Pipe Replacement).
13. Install radiator inlet hose. Refer to Radiator Inlet Hose Replacement (LDD, LUH, and LUJ) (See: Engine, Cooling and Exhaust/Cooling
System/Radiator Hose/Service and Repair/Radiator Inlet Hose Replacement)Radiator Inlet Hose Replacement (LDE, LXV, 2H0, and LUW) (
See: Engine, Cooling and Exhaust/Cooling System/Radiator Hose/Service and Repair/Radiator Inlet Hose Replacement).
14. Remove charge air cooler outlet air hose. Refer to Charge Air Cooler Outlet Air Hose Replacement (See: Powertrain Management/Fuel Delivery
and Air Induction/Turbocharger/Intercooler/Intercooler Duct/Service and Repair).