Cruze L4-1.4L Turbo (2011)
4. Crimp the eared clamp (1) using the CH-804 - tensioner (1), and a torque wrench. Tighten the eared clamp to 25 Nm (19 lb ft).
5. Install the spacer ring (2) into the groove of the halfshaft bar using
4. Crimp the eared clamp (1) using the CH-804 - tensioner (1), and a torque wrench. Tighten the eared clamp to 25 Nm (19 lb ft).
5. Install the spacer ring (2) into the groove of the halfshaft bar using