Cruze L4-1.4L Turbo (2011)
15. Crimp the eared clamp (1) using the CH-804 - tensioner (1), and a torque wrench. Tighten the eared clamp to 25 Nm (19 lb ft).
16. Fully stroke the joint several times to disperse the grease.
17. Install the left or right wheel drive shaft, refer to Front Wheel Drive Shaft Replacement - Left Side (See: Service and Repair/Front Wheel Drive
Shaft Replacement - Left Side) or Front Wheel Drive Shaft Replacement - Right Side (See: Service and Repair/Front Wheel Drive Shaft
Replacement - Right Side).