Cruze L4-1.4L Turbo (2011)
Clutch Pedal Position Sensor / Switch: Service and Repair
Clutch Pedal Position Sensor Replacement
Removal Procedure
1. Disconnect the clutch pedal position sensor wiring harness plug.
2. Remove the clutch pedal position sensor bolt (2).
3. Remove the clutch pedal position sensor (1).
Installation Procedure
1. Install the clutch pedal position sensor (1).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the clutch pedal position sensor bolt (2) and tighten to 3 Nm(27 lb in).
3. Connect the clutch pedal position sensor wiring harness plug.