EL Camino V6-229 3.8L (1982)
Stabilizer Bar: Service and Repair
Fig. 15 Stabilizer bar replacement. Caballero & El Camino
CABALLERO & EL CAMINO
1.
Raise and support vehicle, then the rear axle.
2.
Remove stabilizer bar to lower control arm attaching bolts, then the stabilizer bar, Fig. 15.
3.
Reverse procedure to install. Use spacer shims, if needed, placed equally on each side of stabilizer bar. Tighten attaching bolts with vehicle at curb
height.