EL Camino V8-305 5.0L (1984)
4.
Remove brake hold-down springs with suitable tool.
5.
Lift actuating lever, then unhook actuator link from anchor pin and remove.
6.
Remove actuating lever(s) and return spring.
7.
Spread shoes apart and remove parking brake strut and spring.
8.
Disconnect parking brake cable from lever, then remove brake shoes from backing plate.
9.
Separate brake shoes by removing adjusting screw and spring, then unhook parking brake lever from shoe assembly.
10.
Clean dirt from brake drum, backing plate and all other components. Do not use compressed air or dry brush to clean brake parts. Many
brake parts contain asbestos fibers which, if inhaled, can cause serious injury. Clean brake parts with a water soaked rag or a suitable
vacuum cleaner to minimize airborne dust.
