Equinox AWD V6-3.4L (2008)
1. Position the grille to the front fascia.
2. Install the grille to the front fascia by pushing in to secure the retainers around the perimeter of the grille.
Notice: Refer to Fastener Notice.
3. Install the screw to the bottom center of the grille.
Tighten the screw to 2 N.m (18 lb in).
4. Install the radiator grille strap into the front fascia and grille by pushing the fingers on the strap into the grille and fascia until fully secured.
5. Install the front fascia support.
6. Install the front fascia assembly.
