Equinox AWD V6-3.4L (2008)
3.
Look for separation of the center support beam and the side rail track.
4.
Cut a piece of Kent-Automotive(TM) 30 mm wide BRS Flocking tape, or equivalent, approximately 152 mm (6 in) in length.
5.
Install the flocking tape (1) underneath the center support beam using the trim stick (2) to separate the center support beam and the side rail track.
6.
Ensure that the flocking tape is positioned underneath the complete width of the center support beam.
7.
Reinstall the headliner.
Parts Information
Warranty Information
Disclaimer
