Equinox AWD V6-3.4L (2008)
Tighten the sensor to 23 N.m (17 lb ft).
3. Connect the ECT sensor harness connector. Push in the connector until a click is heard, then pull back to confirm a positive engagement.
4. Install the fuel injector sight shield.
5. Fill the engine cooling system to proper level. Refer to Cooling System Draining and Filling (LNJ Static Fill) Cooling System Draining and Filling
(LNJ GE 47716 Fill) Cooling System Draining and Filling (LY7 Static Fill) Cooling System Draining and Filling (LY7 GE 47716 Fill).
