Equinox AWD V6-3.4L (2008)
3. Coat the rocker arm friction surfaces using prelube GM P/N 1052367 (Canadian P/N 992869) or the equivalent.
Important: Shims may be required under the valve rocker arm pedestals if reconditioning has been performed on the cylinder head or its
components.
4. Install the valve rocker arms in their original positions.
Notice: Refer to Fastener Notice .
5. Install the valve rocker arm bolts.
Tighten the bolts to 42 N.m (31 lb ft) .
6. Install the valve rocker arm cover(s). Refer to Valve Rocker Arm Cover Replacement - Left Side (See: Valve Cover/Service and Repair/Valve
Rocker Arm Cover Replacement - Left Side) and/or Valve Rocker Arm Cover Replacement - Right Side (See: Valve Cover/Service and
Repair/Valve Rocker Arm Cover Replacement - Right Side) .
