Equinox AWD V6-3.4L (2008)
Valve Cover: Service and Repair
Valve Rocker Arm Cover Replacement - Right Side
Valve Rocker Arm Cover Replacement - Right Side
Removal Procedure
1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Injector/Service and Repair/Removal and Replacement/Fuel Injector Sight Shield Replacement) .
2. Remove the generator bracket. Refer to Generator Bracket and Engine Lift Bracket Replacement (LNJ) .
3. Remove the ignition control module bracket from the engine with the ignition control module and spark plug wires still attached. Position out of
the way. Refer to Ignition Control Module Bracket Replacement .
4. Disconnect the positive crankcase ventilation (PCV) fresh air pipe (1) from the right valve rocker arm cover.
Notice: Valve rocker arm cover gasket and sealant must be carefully trimmed away from lower intake manifold gasket. Failure to do so will
damage the lower intake manifold gasket, causing a severe oil leak.
5. Loosen the valve rocker arm cover bolts.
