Equinox AWD V6-3.4L (2008)
Idler Pulley: Service and Repair
Drive Belt Idler Pulley Replacement - Lower
Drive Belt Idler Pulley Replacement - Lower
Tools Required
J 39914 Serpentine Belt Tensioner Unloader
Removal Procedure
1. Using J 39914 rotate the drive belt tensioner (8) to release the tension on the drive belt.
2. Remove the drive belt from the right idler pulley (2).
3. Carefully release J 39914 to relieve the drive belt tensioner spring tension.
4. Remove J 39914 from the drive belt tensioner (8).
5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
6. Remove the right front wheel. Refer to Tire and Wheel Removal and Installation .
7. Remove the engine splash shield. Refer to Engine Splash Shield Replacement .
8. Loosen the lower belt idler pulley bolt.
9. Remove the lower belt idler pulley and bolt from the engine front cover.
Installation Procedure