Equinox AWD V6-3.4L (2008)
8. Fully insert the generator attachment bolt most near the intake manifold.
Tighten the bolt to 25 N.m (18 lb ft).
9. Install the PCV foul air hose. Refer to Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (See: Powertrain Management/Emission
Control Systems/Positive Crankcase Ventilation/PCV Valve Hose/Service and Repair) .
10. Install the EGR pipe. Refer to Exhaust Gas Recirculation Pipe Replacement .
11. Position the heater outlet pipe to the throttle body and the upper intake manifold.
12. Install the heater outlet pipe nuts (2) to the throttle body.
Tighten the nut to 10 N.m (89 lb in).
13. Install the heater outlet pipe bolt (3) to the throttle body.
Tighten the bolt to 10 N.m (89 lb in).
14. Install the heater outlet pipe nut (4) to the upper intake manifold.
Tighten the nut to 25 N.m (18 lb ft).