chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Engine - Oil Leaks from Crankshaft Rear Main Seal|Page 3509 > < Engine - Oil Leaks from Crankshaft Rear Main Seal|Page 3507
Page 4
background image

Install # 2 Self Drill Screws 38 mm (1.5 in) long, eight needed, (1) and tighten down flush to the plate.

Before installing the force screw, apply a small amount of the Extreme Pressure Lubricant J 23444-A, provided in the tool kit.

Install the force screw (1) and back off both jam nuts (2) and continue to turn the force screw (1) into the removal plate to remove the seal from the 
crankshaft.

Engine - Oil Leaks from Crankshaft Rear Main Seal|Page 3509 > < Engine - Oil Leaks from Crankshaft Rear Main Seal|Page 3507