Equinox AWD V6-3.4L (2008)
8. Remove the screws retaining the two halves of the blower case assembly.
9. Separate the two halves of the blower case assembly.
10. Remove the evaporator core from the blower case assembly.
Installation Procedure
1. Install the evaporator core to the blower case assembly.
2. Assemble the two halves of the blower case assembly.
Notice: Refer to Fastener Notice.
3. Install the screws to retain the two halves of the blower case assembly.
Tighten the screws to 1.5 N.m (13 lb in).
