Equinox AWD V6-3.4L (2008)
Important: Make sure the HVAC module seals are flush and even as they meet their mating surfaces. This will reduce the chance of leaks
and ensure proper fit.
1. Inspect the front of dash seal for proper alignment.
2. Inspect the seal mating surfaces to ensure there are no obstructions.
3. Position the HVAC module in the vehicle.
4. Install, but do not tighten, the seal nuts to the front of dash.
5. Install the instrument panel tie bar.
Notice: Refer to Fastener Notice.
Important: New front of dash seal nuts must be used to prevent leaks.
6. Tighten the HVAC module seal nuts to the front of dash. Draw the HVAC module to the front of dash evenly by alternating between the seal nuts.
Tighten the nuts to 8 N.m (71 lb in).
