Equinox AWD V6-3.4L (2008)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
Air Cleaner Inlet Duct Replacement
Removal Procedure
1. Loosen the clamps at both ends of the air cleaner intake duct.
2. Remove the positive crankcase ventilation (PCV) fresh air pipe from the air cleaner intake duct.
3. Remove the air cleaner intake duct from the mass air flow (MAF) sensor and throttle body.
Installation Procedure
1. Install the air cleaner intake duct to the MAF sensor and throttle body.
2. Install the PCV fresh air pipe to the air cleaner intake duct.
Notice: Refer to Fastener Notice.
3. Tighten the clamps at both ends of the air cleaner intake duct.
Tighten the clamps to 4 N.m (35 lb in).
