Equinox AWD V6-3.4L (2008)
1. Remove the fuel rail.
2. Remove the fuel injector retaining clip (1).
3. Remove the fuel injector (3) from the fuel rail.
4. Remove the fuel injector upper O-ring (2).
5. Remove the fuel injector lower O-ring (4).
Installation Procedure
1. Install the fuel injector upper O-ring (2).
2. Install the fuel injector lower O-ring (4).
3. Lubricate the fuel injector upper O-ring (2) using GM P/N 12345616 (Canadian P/N 993182).
4. Install the fuel injector (3) to the fuel rail.
5. Install the fuel injector retaining clip (1).
6. Install the fuel rail.