Equinox AWD V6-3.4L (2008)
1. Install the throttle body studs if previously removed.
Tighten the throttle body stud to 6 N.m (53 lb in).
2. Install the throttle body (1) to the intake manifold.
3. Install the throttle body bolts.
Tighten the throttle body-to-intake manifold bolts to 10 N.m (89 lb in).
4. Connect the TAC module electrical connector (1) to the TAC module (3) then press down the connector lock (2) in order to secure the TAC
module electrical connector.
5. Install the heater outlet pipe.
6. Install the air cleaner intake duct.
