Equinox AWD V6-3.4L (2008)
1. Apply sealer to the oil pressure indicator switch threads. Refer to Sealers, Adhesives, and Lubricants (See: Engine, Cooling and
Exhaust/Engine/Specifications/Mechanical Specifications/Sealers, Adhesives, and Lubricants) for the correct part number.
Notice: Refer to Component Fastener Tightening Notice .
2. Install the oil pressure indicator switch.
Tighten the switch to 16 N.m (12 lb ft).
3. Connect the oil pressure indicator switch electrical connector (2).
4. Lower the vehicle.