Equinox AWD V6-3.4L (2008)
Steering Mounted Controls Assembly: Service and Repair
Steering Wheel Control Switch Assembly Replacement (Equinox)
Removal Procedure
1. Use a small flat-bladed tool to release the switch assembly from the steering wheel.
2. Disconnect the cruise switch electrical harness connector from the switch.
Installation Procedure
1. Connect the switch electrical harness connector to the switch. Push in the connector until a click is heard and pull back to confirm a positive
engagement.
2. Insert the cruise switch into the steering wheel and gently apply pressure to fasten the switch in the opening.
