Equinox AWD V6-3.4L (2008)
5. Engage the transaxle oil cooler lines with the fan shroud by snapping in place.
6. Lower the vehicle.
7. Connect the upper transaxle oil cooler line to the radiator.
Important: DEXRON(R) VI automatic transmission fluid is not compatible with this transaxle. If DEXRON(R) VI ATF is used,
transaxle failure will result. This transaxle uses GM T-IV fluid P/N 88900925.
8. Add fluid to the transaxle. Refer to the Transmission Fluid Check (See: Testing and Inspection/Component Tests and General
Diagnostics/AF33-5 - Automatic Transaxle/Transmission Fluid Check) .
9. Start the engine a check for leaks.
Fluid Cooler Pipe Seal Replacement
Fluid Cooler Pipe Seal Replacement
