Equinox AWD V6-3.4L (2008)
Transmission Position Switch/Sensor: Service and Repair
AF33-5 - Automatic Transaxle
Automatic Transmission Range Selector Lever Replacement
Tools Required
J 36346 Fascia Retainer Remover
Removal Procedure
1. Remove the battery tray. Refer to Battery Tray Replacement .
2. Ensure that the shift control range select lever is in the park (P) position.
3. Using the J 36346 , disconnect the shift control cable (1) from the transaxle range switch lever (4).
4. Depress the shift control cable retainer clip tabs (2) and remove the shift control cable from the shift control cable bracket (3).
5. Remove the transaxle range selector lever nut and lever.
Installation Procedure