Equinox AWD V6-3.4L (2008)
8. Remove the control valve body bolt (3) M6 x 42.
9. Remove the 3 control valve body bolts (2) M6 x 95.
10. Remove the control valve body bolt (7) M6 x 55.
11. Remove the control solenoid valve body and transmission control module (TCM) assembly (5).
Notice: Use care when removing or installing the filter plate assembly. A broken or missing retaining tab may not adequately secure the filter
plate to the control solenoid valve assembly, resulting in possible damage or contamination.
12. Remove the control solenoid valve assembly filter plate (6).
*
Discard the filler plate. It is not reusable.
*
Inspect the pressure switch manifold seals for damage or contamination. Replace the control solenoid valve assembly as necessary.
*
Inspect the upper channel plate bolt holes for damage, peening or burnelling. Any damage around the bolt holes near the pressure control
switch (PCS) feed holes could cause leakage around the PCS seals. Replace the upper channel plate as necessary.
Installation Procedure
Notice: Use care when removing or installing the filter plate assembly. A broken or missing retaining tab may not adequately secure the filter
plate to the control solenoid valve assembly, resulting in possible damage or contamination.
1. Install a NEW control solenoid valve assembly filter plate (1).
