Equinox AWD V6-3.4L (2008)
Notice: Refer to Fastener Notice .
2. Install the transmission mount to frame rail bolts.
Tighten the bolts to 37 N.m (27 lb ft).
3. Install the transmission mount to transmission bolts.
Tighten the bolts to 55 N.m (41 lb ft).
4. Install the battery tray. Refer to Battery Tray Replacement .
5. Remove the engine support. Refer to Engine Support Fixture .
Transmission Rear Mount Bracket Replacement
Transmission Rear Mount Bracket Replacement
Removal Procedure
