Equinox AWD V6-3.4L (2008)
Flex Plate: Service and Repair
Engine Flywheel Replacement
Removal Procedure
1. Remove the automatic transaxle. Refer to Transmission Replacement .
2. Remove the engine flywheel bolts and flywheel.
3. Clean the engine flywheel bolt threads and bolt holes.
4. Clean and inspect the engine flywheel.
Installation Procedure
Notice: Refer to Fastener Notice .
1. Install the engine flywheel and bolts
Tighten bolts to 71 N.m (52 lb ft).
2. Install the automatic transaxle. Refer to Transmission Replacement .