Equinox AWD V6-3.4L VIN F (2006)
Amplifier: Service and Repair
AMPLIFIER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the rear seat.
2. Remove the fasteners that hold the amplifier.
3. Disconnect the electrical connectors from the amplifier.
4. Remove the amplifier from the vehicle.
INSTALLATION PROCEDURE
1. Install the amplifier in the vehicle
2. Install the electrical connectors to the amplifier.
3. Install the fasteners to the amplifier.
Tighten the fasteners to 3 N.m (26 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the rear seat.
