Equinox AWD V6-3.4L VIN F (2006)
Speaker: Service and Repair
Rear Door
SPEAKER REPLACEMENT - REAR DOOR
REMOVAL PROCEDURE
1. Remove the rear door trim panel.
2. Remove the speaker screws.
3. Disconnect the electrical connector from the speaker.
4. Remove the speaker from the rear door.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the speaker.
2. Install the speaker to the rear door.
3. Install the screws to the speaker.
Tighten the screws to 2.5 N.m (22 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the rear door trim panel.