Equinox AWD V6-3.4L VIN F (2006)
Windshield Moulding / Trim: Service and Repair
Applique Replacement - Windshield Frame
Removal Procedure
1. Remove the screws from the windshield pillar applique.
2. Remove applique from the vehicle by carefully pulling from the front of the molding rearward to disengage the retainers.
Installation Procedure
1. Position the windshield pillar applique to the vehicle and push in to secure the retainers.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the screws that secure the applique to the vehicle.
