Equinox AWD V6-3.4L VIN F (2006)
-
Use care when working around the head curtain inflator module. Sharp tools may puncture the curtain airbag. If the head curtain inflator module is
damaged in any way, it must be replaced.
-
If a vehicle is equipped with a head curtain inflator module ensure that the inflator module and tether are undamaged. If tether or curtain airbag are
damaged in any way, they must be replaced.
2. Remove the fastener from the garnish molding.
3. Starting at the top, gently pull on the garnish molding to disengage the clips.
4. Remove the molding from the vehicle.
INSTALLATION PROCEDURE
1. Position the windshield upper garnish molding to the top of the instrument panel. Align the molding to the body structure.
2. Gently push at the clip locations to install the garnish molding.
IMPORTANT: If the vehicle is equipped with a side inflator module, position the module tether rearward of the molding attaching clips.
3. Install the fastener.
