Equinox AWD V6-3.4L VIN F (2006)
module is damaged in any way, it must be replaced.
Notice: If a vehicle is equipped with a head curtain inflator module ensure that the inflator module and tether are undamaged. If tether or curtain
airbag are damaged in any way, they must be replaced.
1. Using a small flat-bladed tool, remove the fastener cover from the windshield upper garnish molding, by prying at the bottom edge.
2. Remove the fastener from the garnish molding.
3. Starting at the top, gently pull on the garnish molding to disengage the clips.
4. Remove the molding from the vehicle.
Installation Procedure
1. Position the windshield upper garnish molding to the top of the instrument panel. Align the molding to the body structure.
Important: If the vehicle is equipped with a side inflator module, position the module tether rearward of the molding attaching clips.
