Equinox AWD V6-3.4L VIN F (2006)
1.
Remove the door glass seal from all the doors. Refer to the illustration above.
2.
Check the gap between the glass and the metal flange. The gap should be 10 to 12 mm (3/8 in) for good contact pressure of the seal to the glass.
Refer to the illustration above. If the gap is greater than 12 mm (1/2 in), refer to the next step.
3.
To protect the sheet metal finish, use duck bill pliers and bend the flange slightly to achieve 10 to 12 mm (1/2 in).
Correction for vehicles built AFTER VIN breakpoints 66032861 (for Chevrolet) and 66038652 (for Pontiac) without secondary seal two lip
design:
-
Replace all the window seals. Refer to the illustration above.
Condition # 3
Wind noise coming from the roof rack area.
Cause
