Equinox AWD V6-3.4L VIN F (2006)
Head Rest: Procedures
Head Restraint Guide Replacement - Front Seat
HEAD RESTRAINT GUIDE REPLACEMENT - FRONT SEAT
REMOVAL PROCEDURE
1. Remove the headrest.
2. Disconnect the lower J-hook retainer from the seat back trim cover.
3. Carefully pull up the trim cover, disengaging the hoop and loop retainers, until the headrest guides are exposed.
4. Squeeze the locking tabs on the headrest guide and pull the guides up and out of the seat back pad.
INSTALLATION PROCEDURE
1. Install the seat back trim cover over the top of the seat back.
2. Install the headrest guides by pressing the guides into position until the locking tabs engage.
