Equinox AWD V6-3.4L VIN F (2006)
1. Install the seat back trim cover over the top of the seat back. Refer to Seat Back Cover and Pad Replacement - Front (Fold Flat) (See: Seat
Back/Service and Repair/Removal and Replacement/Seat Back Cover and Pad Replacement - Front (Fold Flat))Seat Back Cover and Pad
Replacement - Front (Non-Fold Flat) (See: Seat Back/Service and Repair/Removal and Replacement/Seat Back Cover and Pad Replacement -
Front (Non-Fold Flat)) .
2. Install the headrest guides by pressing the guides into position until the locking tabs engage.
3. Install the headrest. Refer to Head Restraint Replacement - Front Seat (See: Head Restraint Replacement - Front Seat) .
Head Restraint Replacement - Rear Seat
Head Restraint Replacement - Rear Seat
Removal Procedure
1. Raise the head restraint to the full-up position.
2. Insert an awl into the guide hole.
3. Pull up to remove the head restraint.
Installation Procedure