Equinox AWD V6-3.4L VIN F (2006)
Idler Pulley: Service and Repair
Drive Belt Idler Pulley Replacement - Left
Drive Belt Idler Pulley Replacement - Left
^
Tools Required
-
J 39914 Serpentine Belt Tensioner Unloader
Removal Procedure
1. Remove the air cleaner intake duct.
2. Using J 39914 rotate the drive belt tensioner (8) to release the tension on the drive belt.
3. Remove the drive belt from the right idler pulley (2).
4. Carefully release J 39914 to relieve the drive belt tensioner spring tension.
5. Remove J 39914 from the drive belt tensioner (8).
6. Loosen the left belt idler pulley bolt.
7. Remove the left belt idler pulley and bolt from the generator bracket.
Installation Procedure