Equinox AWD V6-3.4L VIN F (2006)
1. Install the transaxle oil cooler line assembly (1) to the transaxle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the transaxle oil cooler line assembly nut (2).
^
Tighten the transaxle oil cooler lines to 7 Nm (62 inch lbs.).
3. Lower the vehicle.
4. Connect the transaxle oil cooler lines to the radiator.
^
Tighten the transaxle cooler line fittings to 16 Nm (12 ft. lbs.).
5. Important: Dexron III automatic transmission fluid is not compatible with this transaxle. If Dexron III ATF is used, transaxle failure will result.
This transaxle uses GM T-IV fluid P/N 88900925.
Add fluid to the transaxle.
6. Start the engine a check for leaks.